Park Tool SBK-1- Rear End Bearing De/mounting- Kit

Park Tool SBK-1 rear bearing de / assembly kit

The SBK-1 is a professional tool kit for installing and removing industrial bearings in bicycle suspension parts. A comprehensive set of 27 precision machined, hard anodized guides enables compatibility with a wide variety of bearing inside and outside diameters. In combination with our proven bearing press construction, the SBK-1 pushes the old bearing out of the seat quickly and easily and reinserts the new bearing precisely and at right angles.

Contains extrusion sleeves for the following ADs:

16mm, 17mm, 19mm, 20.6mm, 21mm, 22mm, 22.3mm, 24mm, 26mm, 28mm, 28.6mm, 30mm, 32mm, 35mm

Contains extrusion pins and guide pins for bearings with the following IDs:

• 8.5–9mm, 10mm, 12mm, 12.7mm, 15mm, 17mm, 20mm
• Magnetic back plate for easy adjustment and assembly
• Stored in a practical storage case

NOTE: To pull the bearing off, the SBK-1 requires at least 3mm of flat frame construction outside of the bearing to support the withdrawal sleeve / drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor SHX-1.

Highlights

• Tool kit for installing and removing rear mounts
• 27 different adapters for high compatibility